5 Results for Wireless Network Engineer Jobs in Lehi, UT

Add your latest resume to match with open positions.

RF Systems Engineer

Lindon, UT
onsite
Permanent / Full Time
130000 - 145000 USD / Yearly
We are looking for an RF Systems Engineer to contribute to the development of sophisticated radio frequency solutions that support advanced radar and antenna applications in Utah. This position will guide work across design, integration, and validation activities, helping translate technical concepts into reliable hardware performance. The role is well suited to an engineer with deep knowledge of RF and microwave systems who can collaborate across disciplines and solve complex technical challenges throughout the product lifecycle. Responsibilities:• Architect and refine RF transmit and receive paths, covering frequency generation, signal conversion, filtering, amplification, and high-speed data interface considerations.• Evaluate end-to-end RF performance by assessing gain distribution, noise behavior, compression limits, spectral purity, and distortion mechanisms across the system.• Lead the initial bring-up and troubleshooting of RF hardware assemblies, resolving issues uncovered during subsystem and platform integration.• Execute laboratory and field verification efforts to confirm system functionality, operational performance, and readiness for application-specific use cases.• Characterize RF and antenna behavior with standard measurement instrumentation, including network analysis, spectral testing, signal stimulation, and chamber-based evaluations.• Interpret measurement data to isolate root causes, recommend corrective actions, and improve design maturity through iterative engineering updates.• Create and maintain Python-based tools for automation, simulation support, data reduction, and repeatable test workflows.• Partner with systems, electrical, mechanical, firmware, software, and algorithm teams to align design decisions with broader program objectives.• Prepare clear technical records such as design summaries, verification documentation, and test findings to support reviews and development milestones.• Ensure engineering outputs satisfy applicable performance expectations as well as regulatory, environmental, and reliability standards.
2026-10-01T00:00:00Z

Systems Security Engineer

West Valley City, UT
onsite
Permanent / Full Time
145000 - 165000 USD / Yearly
Want to build security, not just maintain it?This isn’t a role where you’ll inherit a mature security program, spend your days updating policies, or stay buried in one narrow piece of the environment.We’re looking for an experienced security focused Systems Engineer who wants to take real ownership of security and compliance while staying hands-on with the technology behind it.You’ll serve as a go-to security expert across the organization, partnering closely with IT leadership to strengthen the security program, advance CMMC and NIST compliance, and tackle infrastructure and systems initiatives along the way.And yes, there’s a pretty great perk: work four 10-hour days and get a three-day weekend every week. Why This Role Is DifferentThis is a newly created position, which means there’s an opportunity to put your fingerprints on the security program rather than simply stepping into someone else’s playbook.You’ll have:<ul><li>Ownership: Help build, mature, and operationalize the security and compliance program.</li><li>Executive visibility: Work closely with IT leadership and the CTO on security strategy, risk, and framework roadmaps.</li><li>Hands-on technical work: Security is the priority, but you’ll still work with systems, infrastructure, identity, endpoints, networking, Microsoft 365, and cloud technologies.</li><li>Autonomy: You’ll be trusted to own projects, make recommendations, communicate risk, and drive initiatives forward.</li><li>Variety: Work across security, compliance, infrastructure, and systems rather than being siloed into one narrow function.</li><li>A 4/10 schedule: Four workdays. Three-day weekends. Enough said.</li></ul>What You’ll OwnYour center of gravity will be security and compliance, particularly within a government contracting environment.You’ll:<ul><li>Drive readiness and ongoing compliance for CMMC Level 2 and NIST SP 800-171.</li><li>Support SOC 2 and PCI DSS initiatives, including control design, evidence collection, remediation, and audit coordination.</li><li>Take security and infrastructure projects from idea to implementation, managing timelines, stakeholders, vendors, risks, and deliverables.</li><li>Administer and improve security technologies across endpoint protection, IAM, SIEM, MFA, email security, vulnerability management, and logging.</li><li>Lead access reviews, security awareness efforts, phishing simulations, and incident-response tabletop exercises.</li><li>Develop the policies, procedures, and security plans required for compliance, then make sure those controls actually work in the real world.</li><li>Partner with leadership on security risk, vendor reviews, customer requirements, and business decisions.</li><li>Roll up your sleeves alongside the IT team on Microsoft 365, Entra ID, servers, networking, endpoints, identity, and other infrastructure initiatives.</li></ul>
2026-10-01T00:00:00Z

Principal Radar Systems Engineer

Lindon, UT
onsite
Permanent / Full Time
165000 - 180000 USD / Yearly
We are looking for a Principal Radar Systems Engineer to lead the system definition, performance analysis, and verification of advanced radar solutions in Lindon, Utah. This position is suited for an experienced engineer who can connect architecture, subsystem design, and test strategy while working across software, firmware, RF, electronics, and mechanical disciplines. The role combines deep technical ownership with hands-on validation, helping ensure radar capabilities meet operational objectives from concept through field testing. Responsibilities: • Direct system-level design activities for advanced radar platforms, including architecture development, interface definition, and performance allocation across subsystems. • Evaluate radar behavior using core principles such as waveform selection, range prediction, target response, detection performance, and tracking accuracy. • Perform analytical studies to assess key metrics including detection range, angle estimation precision, target characterization, and interference effects in multi-radar environments. • Guide the integration of radar assemblies and supporting subsystems into broader product architectures, resolving cross-domain technical issues as they arise. • Create, maintain, and refine system requirements to ensure traceability, technical consistency, and alignment with operational needs. • Plan and execute verification and validation efforts throughout the development lifecycle, using analysis, inspection, demonstration, and formal testing methods. • Establish scalable test strategies for laboratory, integration, and field environments, and produce the associated plans, procedures, and final reports. • Lead indoor and outdoor radar test campaigns, coordinating instrumentation, logistics, data collection, and deployment activities in varied operating conditions. • Investigate performance anomalies through structured troubleshooting and root-cause analysis, and implement disciplined practices for test data storage and tracking.
2026-09-23T00:00:00Z

Cable Technician

Kaysville, UT
onsite
Permanent / Full Time
59000 - 76500 USD / Yearly
We are looking for an experienced Cable Technician to support low-voltage and structured cabling projects in Utah. This role involves installing, terminating, testing, and troubleshooting copper and fiber systems in both new construction and existing buildings. The ideal candidate brings strong field experience, works well with technical teams, and communicates professionally with customers and project stakeholders. Responsibilities:• Install and support low-voltage cabling systems as part of a field-based technical team on commercial project sites.• Lay out and prepare overhead and underground cable pathways, including rough-in work for new installations.• Terminate and connect a variety of copper cabling types, including coaxial, multi-pair, and Category 3 through 6A systems.• Fabricate and mount cable tray, relay racks, and network cabinets using proper measuring tools and hand equipment.• Complete fiber optic installations, including termination work, testing, and related connectivity tasks.• Perform structured cabling work in accordance with construction drawings, schematics, blueprints, and applicable industry standards.• Use copper and fiber testing equipment to verify performance, identify faults, and resolve cabling issues in the field.• Serve as an on-site point of contact for customer representatives by discussing field changes, relaying scope updates, and coordinating proposal requests through the office.• Support additional low-voltage systems such as access control, intercom, sound masking, and similar integrated technologies when needed.
2026-10-01T00:00:00Z

Platform Engineer

Lehi, UT
onsite
Permanent / Full Time
170000 - 218000 USD / Yearly
We are seeking a Principal Platform Engineer to help shape the technical direction of our cloud platform capabilities and serve as a senior technical partner across engineering, security, and architecture. This role operates at an organizational level, driving platform strategy, leading cross-team technical initiatives, and strengthening our cloud security posture across an expanding AWS environment.You will work closely with our Security team as an embedded partner on key platform security efforts, while also coordinating with another Principal Engineer on the Platform team to align and divide technical ownership. This is a highly cross-functional role, requiring strong collaboration with application teams, security, compliance, and architecture to ensure platform services and infrastructure effectively support the broader organization.Responsibilities:<ul><li>Lead the design and continuous improvement of secure, scalable platform solutions in AWS environments.</li><li>Partner with engineering teams across the organization to drive broad technical initiatives and influence platform strategy.</li><li>Build and maintain infrastructure as code using Terraform to standardize deployments and improve operational consistency.</li><li>Develop and enhance platform tooling and automation using languages such as Java, Python, Go, or C#.</li><li>Strengthen cloud security controls by implementing and managing services such as Security Hub, GuardDuty, Config, CloudTrail, secrets management, and private networking patterns.</li><li>Support containerized workloads by improving Docker security practices and optimizing deployment patterns for services running on EC2, Fargate, and other managed platforms.</li><li>Advance CI/CD capabilities through orchestration and automation tools including GitHub Actions, Jenkins, CircleCI, or similar technologies.</li><li>Collaborate on secure software delivery practices, including source control standards, vulnerability scanning, and supply chain protection measures.</li><li>Contribute to agile delivery processes and provide technical leadership that helps teams execute complex platform initiatives effectively.</li></ul>
2026-10-01T00:00:00Z

5 results for Wireless Network Engineer in Lehi, UT